MacBook Pro

Have you ever wondered how to repair a water-damaged MacBook Pro?

You would have done this if you ever faced such a situation!

Everyone uses laptops or other handy devices and we all know that these gadgets are susceptible to damage when they come into contact with water. The MacBook Pro is no exception.

When the MacBook Pro is exposed to excessive water, the motherboard and other peripheral components get damaged. Even some Macs may only work for a few days after encountering water spills, resulting in everything from data loss to the damage of a valuable asset.

So, no matter if you just want to explore the solutions or have really spilt the water on your MacBook, you can consider these recommendations mentioned below. In case of data loss hassles, you can employ the data recovery Mac services.

Tips to Save Your Water-Damaged MacBook Pro

Turn The Laptop Off

The first step is always to switch off the MacBook completely when it encounters water spills. This way, there remains the chance of MacBook survival. Also, when you power off your Mac, the harm to other components such as the CPU, circuitry, and screen is prevented.

To do so, press and hold the power button for a few seconds until it completely shuts down.

The keyboard may have stopped functioning if your system does not shut down after pressing the power button for a long time. Take some tissues and dab the excess liquid on the laptop’s surface, such as the keyboard, screen, or touchpad.

This will enable the hardware sleep sensor, and once the logic board has identified this, it will immediately turn off your MacBook.

Disconnect All Hardware Components From Your MacBook Pro

The next crucial step is to disconnect the power adapter after turning off the laptop. Water, of course, can cause fire, and if the device’s wet-connected peripherals aren’t unplugged, it could lead to a hazard.

Besides that, remove additional components such as the mouse, printer, and charger. This way you can manage to prevent damage spread to crucial MacBook components like battery, motherboard, or connectors.

Stop Water From Dripping Into the Holes

Removing the liquid from the water-damaged MacBook Pro is the next crucial step in minimizing the laptop’s long-term damage.

The laptop screen and keypad both have many vent holes via which water can easily enter.

These vents are also directly connected to the logic boards and are responsible for eliminating heat. As a result, having access to the MacBook’s key components becomes critical to removing water from such holes.

To accomplish this, disconnect the peripherals and take a paper towel to absorb the water from the Mac surface. But ensure you don’t wipe the components because this could cause more damage.

Remove the Battery

It’s now vital to remove the battery if it’s removable once you are detaching all of the hardware components and preventing water from entering through holes.

To do so, turn your MacBook over and check for the bolts that hold the aluminium lid in place. Remove the back panel of the laptop with the required screwdriver. Then remove the battery from the laptop with your fingernail or using a plastic stick.

However, avoid using a metal screwdriver because it may cause a short circuit.

Get Rid of Excess Water

Now that you’ve finished removing all of the devices and components from the laptop and shutting it off, you can move on to getting rid of any remaining water.

To drain the water, place your MacBook in a tent position. This ensures that no components, such as the keyboard, motherboard, or other electronics, come into contact with the water.

But hold on!!

This water-draining method isn’t successful on all MacBook laptops with non-retina displays. Watertight screens or front protective glasses come standard on such MacBooks, ensuring that they are protected from spillage.

New MacBook models, on the other hand, feature retina displays with no aluminium foil or protective glass. So, instead of placing them in a tent position, you can place them 90 degrees against an edge of the table and allow them to dry properly.

Wipe and Clean It Thoroughly

Finally, return the laptop to its original position and wipe away any remaining water. Then, find a table where you can leave the MacBook to dry. Ensure that the space is well-ventilated and cool.

Allowing the MacBook Pro to dry and drain the water in this manner will protect all of the important components and save you money in the long run. Also, only turn on the laptop once the 48-hour period has passed.

Contact Apple’s MacBook Repair Service Providers

Accidents are unavoidable, but the nice part is that they always come with solutions. In addition, one is advised to adhere to safety precautions to guarantee that such issues do not arise. Also, warranting the MacBook Pro comes as a viable solution to save the repair or replacement costs.

So, if you’ve followed all of the instructions above and your laptop is still not working, it’s possible that any part needs to be replaced or repaired. For this, you can contact professionals of data recovery¬†who can both replace and repair any laptop component while recovering any lost data. They’ll clean it thoroughly with specific tools and techniques, as well as help avoid future problems.

So, whenever you’re dealing with a water-damaged MacBook or laptop, be calm and follow these steps.

By admin