Creasing is as ugly as blistering when hanging new wallpaper. The major bummer is that after the wallpaper has dried, creases cannot be undone. Therefore, immediate action is required.

The two main causes of creases in wallpaper are listed here. The first is that errors were made while the wallpapers were being smoothed out. Additionally, if the required soaking time wasn’t adhered to, creases may emerge during drying for paper-based models. Also, when an outdated wallpaper hasn’t been taken down or the surface is uneven, unsightly creases might develop. Anyone who enjoys DIY projects will tell you how crucial it is to prepare the wall properly before hanging wallpaper.

Creases must be addressed during the wallpapering process because it is impossible to erase creases once they have dried. This article discusses why “prevention is always better than cure”, what should be done when they emerge, and the causes of creases.

Reasons For Creases In Wallpaper

First, we should know the reasons for creases in wallpapers to deal with them:

1. Mistakes During Preparation

Making sure the entire wall is even, smooth, and completely free of flaws before the paper is applied is the first step in preventing creases in wallpaper in Dubai.


Any imperfections on the surface must be eliminated before applying paste to the wall, which is essential. If not, they will leave unsightly wrinkles after drying and be visible through the wallpaper. A wallpaper smoother with a long handle or the appropriate scraper can be used for this.

2. Using Wrong Method

In this instance, the wallpaper was put either insufficiently or too thinly. In either scenario, the wallpaper won’t cover completely, leaving creases that are challenging to remove without tearing the paper.

3. Applying The Wrong Paste

Traditional paper-based models should be applied with a water-based paste, and vinyl solutions with emulsion polymer when using wallpaper paste. A paste that contains a solvent or a pressure-sensitive adhesive is not suggested. The salts in the paste will cause the paper to wrinkle after drying.


Professional paper-based wall coverings should never be applied in this manner due to their thinness and fragility. If they are, they will break, bleed, and lose adhesion throughout the drying process.

4. Impose On False Wall Surface

Moisture and unevenness in the wall might cause obvious creases depending on the type of surface chosen. Always check for wallpaper on the floor or between the baseboard and the wall underneath it. This is a dangerous predicament to be in because wallpaper is incompatible with any other building materials.

5. Unattractive Wrinkles

When wallpapers are drying and releasing their water content material, then unattractive wrinkles appear. Because of the damage to the paper surface, these wrinkles form and rely on the depth of the paper.

Tips To Avoid Creases In Wallpaper

  • Ensure Smoothness For A Wall

To erase creases in a paper-based model, the surface underneath must be clear of faults, fractures, and blemishes before putting the wallpaper. This is the primary reason why creases appear in the first place.


The roughness of the wall surface will prevent the paper from sticking, thus a considerable portion of it must be removed with a wallpaper scraper or a wallpaper smoother. Wiping away any leftover dust and dirt helps improve adherence and generate more visually appealing outcomes.

  • Wall Should Be Saturated

Prior to hanging the wallpaper, it is essential to thoroughly wet the wall after any imperfections have been fixed. The paper will adhere evenly and there won’t be any creases thanks to this uniform approach to the surface.

  • Quickly Dry The Wall Immediately

It’s crucial to get rid of wallpaper creases as soon as they first appear rather than waiting until they have already appeared during the initial drying process. This is due to the fact that if the paper isn’t given enough time to fully dry out, additional creases will develop when it dries, which happens more quickly.

  • Implement Wallpaper Using A Gentle Cloth

If preferred, wallpaper can be applied with a soft cloth. Make sure the surface beneath is totally smooth, otherwise, creases will appear where inadequate drying time was given. Before wiping off the surface, make sure the towel is thoroughly wrung out.

  • Must Repair Your Walls

It is advised to fix any flaws in the wall before applying wallpaper in a newly constructed room by patching minor holes and leaving a visible trace behind. If they are exposed to water while the wallpaper is being installed, this will stop new creases from forming.

  • Blisters And Blisters: Natural

Blisters don’t look good on a wall, and they should be avoided when using paper-based models as well. They are a type of mildew that must be swiftly removed before it has a chance to spread and are caused by moisture that has become trapped within the walls.

End Note!

You now have a list of the causes of creases in paper-based walls as well as suggestions for eradicating them. Since creases are either brought on by the wall underneath or by the wallpaper itself, they cannot be entirely avoided. But there are steps that can be performed to enhance the appearance of finished surfaces, such as evenly laying the wallpaper, maintaining a smooth wall, and eradicating any flaws before doing so.

By hasnain